PAGE 3 OF 9
0721 IH-6731
USAGE CONTINUED
1. Secure the safe to a wall stud and to a permanent
shelf or floor using the predrilled mounting holes in
the safe.
NOTE: The safe must be secured to a wall stud
on one side of the safe in the top and bottom
holes in the back of the safe so that it is
anchored to the wall stud in two locations.
Wall anchors should be used on the other side.
The safe may also be mounted to a permanent
shelf or to the floor. Use the hardware provided
or consult Uline Customer Service at 1-800-295-
5510 for fastening hardware for your particular
mounting surfaces.
2. Mark the holes to be used. Drill the appropriate
diameter and depth of pilot holes depending on
the type of hardware being used and the mounting
surface. (See Figure 2)
3. Secure the safe with fasteners.
Figure 2
1-800-295-5510
uline.com
