PAGE 1 OF 40
0321 IH-7208
SEMI-AUTOMATIC
STRETCH WRAP
MACHINE WITH SCALE
1-800-295-5510
uline.com
H-7208
MACHINE DIMENSIONS
Length
98"
Width
60"
Height
132"
Turntable Diameter
60"
Turntable Height from Floor
4⁄"
Wrapping Height
110"
Operation Space
98 x 60 x 132"
Maximum Load Size
52 x 52 x 110"
Approximate Shipping Weight
1,700 lbs.
ELECTRICAL SPECIFICATIONS
• 115 VAC, 60 Hz, Single-phase, 15 AMP
TURNTABLE SYSTEM
• 20 loads per hour (spiral)
• 12 RPM turntable maximum speed
• 4,000 lbs. turntable maximum load capacity
FILM CARRIAGE/ELEVATOR SYSTEM
• Adjustable raise and lower speeds
• Automatic height detection photoelectric sensor
SCALE
• RS232 Serial Port
FILM DELIVERY SYSTEM
• Infinite / Manual Stretch Adjustment
• 10" Diameter Roll Capacity
• 20" Roll Width Capacity
CAUTION! Motor control equipment and
electronic controllers are connected to
hazardous line voltages. When servicing
drive and controllers, there may be exposed
components with housings or protrusions at or
above line potential. Extreme care should be
taken to protect against shock.
The user is responsible for conforming to all
applicable code requirements with respect to
grounding requirements. Do NOT use extension
cords to operate the equipment.
Disconnect AC input power before checking
components, performing maintenance,
cleaning up, and when the machine is not in
use. Do NOT connect or disconnect wires and
connectors while power is applied to circuit.
Wiring work should be performed only by
qualified personnel. There is a danger of
electric shock or fire.
WARNING! Loose clothing must NOT be worn
while the machine is in operation. Stay clear
of moving parts while the machine is running.
Para Español, vea páginas 14-26.
Pour le français, consulter les pages 27-40.
SYSTEM SPECIFICATIONS
Two Person Assembly
Recommended
