PAGE 1 OF 6
0521 IH-7903
1-800-295-5510
uline.com
STEP LADDERS
H-7903, H-7904
TOOLS NEEDED
1/2" Wrench or Socket
Step Ladder x 1
Handrail x 2
Crossbar x 1
Rubber Mallet
Phillips Screwdriver
Safety Glasses
PARTS
ASSEMBLY
CROSS-BRACE FOR HANDRAILS
1. Remove product from carton and unwrap all parts.
2. Align the holes of crossbar with handrails and start
the Phillips head screw from the outside.
(See Figure 1)
3. Repeat this procedure for the opposite side.
4. Tighten screws.
WARNING: Assembly of these types of ladders can be inherently dangerous. Please take all precautions
necessary during the assembly process. Always use a separate ladder to finish assembly in high places.
Never climb a ladder that is not completely assembled. Do not assemble or use a ladder with missing or
damaged parts. Use proper lifting mechanics when assembling a ladder. Watch for overhead electrical
hazards and obstructions.
Figure 1
Hardware Kit
Hex Nut x 2
Hex Head Cap
Screw x 2
Phillips Head
Screw x 4
U Shaped
Bracket x 2
Flat Washer
x 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
