PAGE 4 OF 24
0721 IH-9234
ASSEMBLY CONTINUED
7. Unroll the tent top. (See Figures 12-13)
NOTE: It is recommended to place tent top on a
drop cloth to protect from dirt and abrasions.
8. Pull tent top over frame, lifting up on fabric to create
air cushion under tent top. (See Figure 14)
9. Center tent top on frame by aligning the seams with
hip rafters (HR). (See Figure 15)
10. Loosely fasten the alligator straps and attach to
canopy top at each side of the corners around
eave poles (EV) tubing to secure tent top.
(See Figure 16)
11. Attach base plates to legs and secure with frame
pin. (See Figure 17)
12. Lift downwind side of frame and keep all sides level.
Attach leg poles to the lifted side. (See Figure 18)
NOTE: Always lift the downwind side of tent first.
Figure 13
Figure 12
Drop Cloth
Figure 14
Figure 15
Figure 17
Frame
Pin
Leg
Base
Plate
Figure 16
Alligator Strap
Figure 18
Wind
HR
