PAGE 2 OF 9
0521 RH-9424
MAINTENANCE
DAILY MAINTENANCE
1. Use the attached drain hose to empty the dirty
water from the recovery tank. (See Figure 7)
Figure 7
2. Remove lid and check that dirty water tank float is
undamaged, clean and moves freely on pin.
(See Figures 8 and 9)
Figure 8
Figure 9
3. Clean the recovery tank by rinsing out with water. Fill
the tank with a hose and empty using the drain hose,
or lift off the tank to rinse. (See Figures 10 and 11)
Figure 10
Figure 11
4. Raise the squeegee and wipe down with a soft
cloth. Check that it is clean and the blades are not
damaged. (See Figure 12)
Figure 12
5. Tilt the scrubber back. It may still rest on the support
caster but be slightly lifted. Activate the scrubber by
pulling the drive levers to spin off the brush. Rinse the
brush. (See Figures 13 and 14)
Figure 13
Figure 14
6. Check battery charge. (See Figure 15)
Figure 15
7. To recharge batteries, plug in battery charger using
electrical cord provided with machine. Charge is
complete when the green LED light is on.
(See Figures 16 and 17)
Figure 16
Figure 17
