PAGE 2 OF 9
0222 IH-9924
PEDESTAL BASE ASSEMBLY
1. Place floor mount stands and floor mount T-bracket
on a flat surface. Insert floor mount stands into ends
of T-bracket. Secure stands to bracket using two
large bolts and a 16 mm wrench. (See Figure 1)
Figure 1
Floor Mount Stands
Floor Mount T-Bracket
Large Bolt
2. Insert caster into slots located on top of floor mount
T-bracket. Secure with a 10 mm wrench using one
small hex head bolt and locknut per caster.
(See Figure 2)
Figure 2
Caster
Hex
Head
Bolt
Locknut
3. Insert upright bracket into top mounted opening in
floor mount T-bracket. Secure using one large bolt
and a 16 mm wrench. (See Figure 3 and Inset A)
Figure 3
Inset A
Upright Bracket
Floor Mount T-Bracket
Large Bolt
SEE NEXT PAGE FOR FAN HEAD ASSEMBLY INSTALLATION
