2
u-line.com
2 Inspect & Plan
Product Registration
You have received a carton containing your ice maker unit with a
package inside containing a Use and Care Guide, a Product
Registration Card, and a water line kit. Please complete and
mail the Product Registration Card or register online at
www.U-LineService.com. Once your unit is installed, keep the Use
and Care Guide and this Installation Guide in a safe place for future
reference.
Models Covered
This installation guide covers the following models
Please carefully follow the directions that apply to your unit and
your intended design.
U-ADA15IMB-00
ULN-BI98B-00
U-ADA15IMS-00
ULN-BI95WH-00
U-ADA15IMS-01
ULN-SP18B-03
U-BI2115B-00
ULN-SP18WH-03
U-BI2115S-00
ULN-SS1095FC-03
U-BI2115S-01
ULN-SS1095FD-03
U-BI2115SOD-00
ULN-SS1095NF-03
U-BI2115SOD-01
ULN-SS95-03
U-BI2115W-00
ULN-SS98-03
ULN-BI95B-00
ULN-WH95TP-03
ULN-BI95WH-00
Tools / Material Required
• Screwdrivers — slotted and Phillips head
• 1/4-inch thick door panel material and cutting tools (If installing
a 1/4" Panel)
• 1/4" Nut Driver
• 5/16" Nut Driver
• Side Cutter
• Copper tubing cutter
• 12" Level
• 9/16" Open end wrench
• 7/16" Open end wrench
• Pliers
• Copper tubing
A complete water hook up kit is also available for purchase from
your dealer. Order U-Line Part No. WATERHOOKUP.
Exterior Cleaning
Black and White Models:
• Black and White surfaces may be cleaned with a mild detergent
and warm water solution. Do not use solvent-based or abrasive
cleaners. Use a soft sponge and rinse with clean water. Wipe
with a soft, clean towel to prevent water spotting.
Stainless Models:
• Stainless door panels, handles and frames can discolor when
exposed to chlorine gas, pool chemicals, salt water or cleaners
with bleach.
• Keep your Stainless unit looking new by cleaning with a good
quality all-in-one stainless steel cleaner/polish on a monthly
basis. For best results use Claire Stainless Steel Polish and
Cleaner, which can be purchased from U-Line Corporation
(Part numbers 173348). Frequent cleaning will remove surface
contamination that could lead to rust. Some installations may
require cleaning on a weekly basis.
• Do not clean with steel wool or abrasive pads.
• Do not use cleaners that are not specifically intended
for stainless steel on stainless surfaces (this includes
glass, tile and counter cleaners).
• If any surface discolors or rust appears, clean it quickly with
Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive
cloth. Always clean in the direction of the grain. Always finish
this process with Claire Stainless Steel Polish and Cleaner or
comparable product to prevent further problems.
CAUTION
!
Rust that is allowed to linger can penetrate into the
surface of the stainless steel and complete removal of the
rust may not be possible.
