PAGE 2 OF 33
0821 IH-5848
SETUP
SAFETY
OVERVIEW OF CONTROLS CONTINUED
RELEASING THE TRANSPORTATION LOCK
1. Release the red transportation lock on the
subplatform of the balance by turning the red
pointer 90° counterclockwise. (See Figure 1)
INSTALLING THE PLATFORM
1. Balances with a rectangular platform are placed
into the subplatform as shown and rotated
counterclockwise until locked. (See Figure 2)
2. Round platforms are placed straight down on
subplatform. (See Figure 3)
Figure 1
Subplatform
Transportation
Lock Pointer
Locked
Position
Unlocked
Position
Figure 2
Figure 3
• Verify that local AC power supply is within input
voltage range printed on AC adapter’s data label.
• Only connect AC adapter to a compatible
grounded electrical outlet.
• Do not position scale where difficult to disconnect
AC adapter from power receptacle.
• Make sure that power cord does not pose a
potential obstacle or tripping hazard.
• For indoor use. Operate only in dry locations.
• Operate only under ambient conditions specified in
these instructions.
• Do not operate in hazardous or unstable
environments.
• Do not drop weight onto pan.
• Only use approved accessories and peripherals.
• Disconnect power before cleaning or servicing.
• Service should be performed only by authorized
personnel.
#
DESCRIPTION
#
DESCRIPTION
1
Battery Charge Symbol
8
Kilogram, Grain Symbols
2
Stable Weight Symbol
9
Check Weighing Symbols
3
Negative Symbol
10
Pound, Ounce, Pound:Ounce Symbols
4
Center of Zero Symbol
11
Percent, dwt, g/mol symbols
5
NET Symbol
12
Gravity, Pieces, t hk, t sg, t tw, Hold Symbols
6
Preset Tare, Tare Symbols
13
Newton, Totalization, Dynamic, Bluetooth Symbols
7
Pointer Symbols
NOTE: Some symbols might not be available, depending on model.
DISPLAY
DISPLAY SYMBOLS
2
3
4
1
5
6
8
9
10
11
12
13
7
g/mol
