PAGE 5 OF 9
0415 IH-2665
MAINTENANCE
INSTRUCTIONS TO CLEAN
OR CHANGE DUST CUP FILTER
1. To remove debris, tap filter against waste container
and/or brush with dusting brush accessory tool. You
may also vacuum the filter using a different cleaner.
2. If filter needs further cleaning, wash in warm water
using a mild detergent. To clean between filter pleats,
fan open under running water.
3. If dust cup needs cleaning, wash in warm water using
a mild detergent. Do not submerge dust cup lid, wipe
only with a damp cloth.
4. When all parts are completely dry, replace filter in dust
cup and replace lid.
NOTE: These parts are not dishwasher safe.
NOTE: Your dust cup filter may need to be
replaced if cleaning it does not restore cleaning
performance.
REINSTALLING THE DUST CUP
1. Replace filter onto center tube in dust cup applying
gentle pressure.
2. Line up tabs on dust cup with openings on lid, rotate
lid clockwise while applying pressure to secure. The
lock symbol ( ) on lid will be centered over dust cup
handle when properly assembled. (See Figure 14)
3. To replace dust cup, position dust cup with handle
facing inside the dust cup compartment; place bottom
of dust cup in bottom of compartment and rotate
upward, pushing dust cup against cleaner until it locks
into place.
PRE-MOTOR FILTER
Check the pre-motor filter (1) each time the dust cup is
emptied. Clean or replace as needed. (See Figure 15)
TO CLEAN PRE-MOTOR FILTER
1. Remove filter centered in the bottom of the dust cup
compartment.
2. Shake filter to remove excess dust. If necessary, the
filter can be cleaned by vacuuming with another
cleaner or washing with mild detergent.
3. Reinstall filter after completely dry.
CARTRIDGE FILTER
Check the true HEPA filter each time dust cup is emptied.
Replace twice a year or as needed.
TO REMOVE TRUE HEPA CARTRIDGE FILTER
1. Push down on filter door latch (3) and pull door away
from cleaner. (See Figure 15)
2. Push down on HEPA cartridge latch and remove filter (2).
(See Figure 16)
HOW TO CLEAN FILTER
1. Remove from cleaner.
2. To remove debris, tap filter against waste container
or brush off. You may also vacuum the filter using
a different cleaner. If filter needs further cleaning,
wash in warm water using a mild detergent. To clean
between filter pleats, fan open under running water.
NOTE: Do not put any parts in a dishwasher.
NOTE: Your washable filter may need to be
replaced if cleaning it does not restore cleaning
performance.
TO REPLACE TRUE HEPA CARTRIDGE FILTER
1. Place bottom tabs of filter cartridge into slots. Rotate
filter toward cleaner, press firmly against cleaner to
latch. Make sure true HEPA cartridge latch is secured
on both sides.
2. Replace filter door by placing tabs of door into slots
on cleaner. Rotate door up and against cleaner until it
locks into place.
1
2
3
Tab
Tab
Figure 14
Figure 16
Figure 15
