U-Line Door Panel Installation Guide
8
Panel Installation
1. Fully open door,
2. Starting at corner, pull gasket
away from door.
3. Continue to pull gasket free
from gasket channel.
4. Upon removal, lay gasket
down on a flat surface.
IMPORTANT
IMPORTANT
If working with the door that houses the display, make
certain the display cable remains securely seated in the
inner door channel, see below.
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY PANEL FLAT AND WITHOUT
INTERFERENCE
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY FRAME FLAT AND WITHOUT
INTERFERENCE
23-1/2
"
3/4"
MIN
Solid Overlay
30"
2 3/4" Min
30"
Frame Overlay
3/4"
MIN
3024 Series
23-1/2
"
Display
Cable
Inner
Door Channel
