U-Line Door Panel Installation Guide
7
Overlay / Frame Overlay Panel
IMPORTANT
IMPORTANT
Due to differences in surrounding cabinetry the panel may
not perfectly align with door. The procedure below is
designed to provide a finished overlay panel that
seemlessly integrates with surrounding cabinetry.
Panel Preparation
A full overlay door panel completely covers the door frame and
provides a built-in appearance.
IMPORTANT
IMPORTANT
• The door panel must not weigh more than 20lbs.
• It is important to ensure that all drilled holes are drilled to the
correct depth in order to avoid splits in the wood when
hardware is installed.
• Appliance will need up to 34 1/2" to the under side of the
counter to leave room for leveling adjustments.
1. Cut the panels to the dimensions listed in the appropriate
diagram below.
2. Optional: Stain or Finish panel to desired stain or color. Be sure
to closely follow the instructions provided by the manufacturer.
IMPORTANT
IMPORTANT
If finishing frame overlay, both sides of overlay must be
finished in order to prevent warping.
3. Optional: Install handles and hardware.
8 3000 Series Overlays
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY PANEL FLAT AND WITHOUT
INTERFERENCE
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY FRAME FLAT AND WITHOUT
INTERFERENCE
17 1/2"
17 1/2"
3/4"
MIN
3/4"
MIN
Solid Overlay
30"
Overlay & Frame Overlay Panel Dimensions
3018 and 3036 Series
2 3/4" Min
30"
Frame Overlay
