TOWER INSTALLATION - CDE224C
6
Connect to Nitrogen Tank
Assemble and connect tank regulator to tank
1. Attach ball valve to tank regulator (not included).
Tighten with an adjustable wrench. Make sure valve is
in the off position - turned clockwise as far as it can
go.
2. Attach regulators to nitrogen tank. Hand tighten the
coupling nut and then use an adjustable wrench for an
additional quarter turn. DO NOT OVER TIGHTEN.
3. Attach nitrogen
hose to ball valve on tank regulator.
Make sure valve is in the off position - turned
clockwise as far as it can go.
4. Attach other end of nitrogen
hose to T- connector on
gas hose that goes to each infuser regulator.
T-Connector
