OPERATION INSTRUCTION
38
LANGUAGE
Select Language and press OK to enter into the Language setting mode. The languages
that you can select from are: English, Spanish, Portuguese, Italian, French, and Dutch.
The default language is English. Use the Up/Down buttons to toggle between languages
and press the OK button to select and save your new language setting.
POWER
Select Power Save On and press OK to enter into the Power setting mode. Use the Up/
Down buttons to toggle between OFF and ON. The default is set to ON. Press the OK button
to select and save your new Power settings.
SOUNDS
Select Sounds On and press OK to enter into the Sounds mode. Use the Up/Down buttons
to toggle between OFF and ON. The default is set to ON. Press the OK button to select and
save your new Sound setting.
TESTING MODE
Press and hold the bottom Scan button and Quick Start button at the same time to power
up. It will then start Key testing, when it has finished, press the OK button and Quick Start
button at the same time to test the next process.
Enter Display testing. When finished with the testing, press any key to leave. It has 10
steps, each step is 1 second long.
STEP 1: All LED lights will turn on.
STEP 2: The two color Dot Matrix will turn on with a red color, and the one color Dot Matrix
will turn on. It will display 1.
STEP 3: The two color Dot Matrix will turn on with a green color, and the one color Dot
Matrix will turn on. It will display 2.
STEP 4: The two color Dot Matrix will turn on in the first line. It will display 3.
STEP 5: The two color Dot Matrix will turn on in the second line. It will display 4.
STEP 6: The two color Dot Matrix will turn on in the third line. It will display 5.
STEP 7: The two color Dot Matrix will turn on in the fourth line. It will display 6.
STEP 8: The two color Dot Matrix will turn on in the fifth line. It will display 7.
STEP 9: The two color Dot Matrix will turn on in a horizontal line of odd number. It will display 8.
STEP10: The two color Dot Matrix will turn on in a horizontal line of even number. It will display 9.
STEP11: The entire display will light up and enter into the life test. Press any button to leave.
