5. Power Switch / Telephone call
When push power switch button continuously about 5 seconds, power switch is on
with “Beep” sound
During operating, blue colored lamp is flickering each 2 seconds
6. Caution
After purchasing product, it needs to step of pairing when first operation doing.
Pairing is registration procedure between headset and Bluetooth support mobile or
Bluetooth devices. This step must do by your self. After that, you can listen to music
and telephone calling normally. It also works like exterminates interruption and set up
the security as well.
Pairing is performed once the first registration after purchasing product. After first
pairing, you don’t need to do pairing again.
* Take out of goods from warehouse, this Bluetooth UM-1000B is not completely
charged. It is only about 30% of battery capacity being charged. After purchase, you
should recharge our Bluetooth being fully charged.
7. Pair Bluetooth Headset
※
Pairing
- When push power Switch/Telephone Calling button about 3 second firmly, power
lamp will be on with “Beep” sound.
- This time you must not release the button keep push firmly. Then “Blue” lamp is
completely will be on. After that, you should released button. (Ready to pairing
with your Bluetooth Devices)
- Find “Device List” in your mobile or PC
- Search for “Bluetooth Devices”
Æ
If required, press “Yes” to activate Bluetooth
then press “New”
- After a moment the display shows a list of Bluetooth devices within range.
Please Note) Bluetooth needs to be activated on the headset.
There should be no more than 10 Meters (32 Feet) between the devices.
It is not necessary to have clear space between them.
- Key in the access code (ALL UNEEDS PRODUCTS ARE 4 ZEROS) and press “OK”
- The headset is paired with the Mobile phone or PC
- You can hear the incoming call alert in the headset and use it to answer calls
