10
Algorithm of working in LAN
1.
Wi-Fi network accessibility determination
2.
Connection to the programmed SSID#1
3.
If DHCP - obtaining IP address with the start of the repeater
4.
Update of IP status of address (announcement and extension of reserved
IP, if DHCP)
5.
Determine accessibility of U-Prox IC L (IP or DNS name)
6.
Periodic sending of test signals
7.
Sending events if there is. Waiting for server commands.
8.
Failure - switch to the another SSID programmed
Algorithm of operation on the Internet (local wire net)
1.
Wi-Fi network accessibility determination
2.
Connection to the programmed SSID#1
3.
If DHCP - obtaining of IP address within local network affiliate at repeater
launch
4.
Update of status of IP addresses (announcement and extension of
reserved IP, if DHCP)
5.
Determine possibility of access to the Internet (accessibility of given IP
address of router)
6.
Determine accessibility of U-Prox IC L (IP or DNS name)
7.
Periodic sending of test signals
8.
If there is, send the events. Waiting for server commands.
9.
Failure - switching to the second specified IP address of router.
10. Repeated failure - switch to the another SSID programmed
Wireless lock system architecture
The architecture of the wireless locks system has definitely hierarchic structure. All
U-Prox IP500 control panels operate in the automatic mode, i.e. make decision
about the access using data downloaded beforehand.
U-Prox IP control panel routes data from the allowed U-Prox IP500 wireless panels
via U-Prox HE and U-Prox HW repeaters. The U-Prox access control system server,
U-Prox IC L, U-Prox HE and U-Prox HW communicate each other via the computer
network. The U-Prox IC L, U-Prox HE and U-Prox HW communicate to the U-Prox
IP500 wireless panels via the ISM band radio.
