11
6. Utility
6.1 Do Format
Caution
User is responsible for
verification of targets’ quality. Testing a few
completed targets in a mass production environment for quality control is
recommended.
6.1.1 Auto Format
This function formats flash into FAT. Plug in the flash media and press "OK". The system
will automatically detect its capacity, then format the media per its capacity.
⚫
If the flash media format is already FAT16 or FAT32, the format function wo
n’t alter its
original format.
⚫
If the original flash media is not FAT format, i.e. NTFS, Linux or FAT multipartition.
The system will format per flash’s capacity. If capacity is above 2GB, the system will format
the flash to FAT32 and below 2GB, the system will format the flash to FAT16.
Capacity
<
2GB
Format FAT16
Capacity
>
2GB
Format FAT32
Note
The source port will not perform any formatting because this function will
delete the flash media’s data.
6.1.2 FAT16 Format
Sets the FAT16 format.
6.1.3 FAT32 Format
Sets the FAT32 format.
6.1.4 Set FAT16 Cluster Size
Sets the FAT16 cluster size.
6.1.5 Set FAT32 Cluster Size
Sets the FAT32 cluster size.
