6
Function Table
Function
Description
1. Copy
Data and whole media duplication only.
2. Compare
Bit-for-bit comparison between the source and target flash medias.
3. Copy+Compare
First copies, then compares the target to the source once
duplication is completed.
4. Show CF Info.
This feature will show CF/CFast
card’s brand, FW Version, S/N,
capacity, file format, and content size.
5. System Info.
This feature will show system information, such as, model number
and firmware version.
6. Utility
6.1 Do Format
6.1.1 Auto Format
Auto formats media to FAT16 or 32.
6.1.2 FAT16 Format
Formats media to FAT16.
6.1.3 FAT32 Format
Formats media to FAT32.
6.1.4 Set FAT 16 Cluster Size
Sets FAT16 Cluster size.
6.1.5 Set FAT 32 Cluster Size
Sets FAT 32 Cluster size.
6.2 Quick Erase
Erases flash media content, while keeping the FAT format.
6.3 Full Erase
Fully erases flash data bit-for-bit, including format and content.
6.4 DoD Erase
Erases flash three times, complying with USA Department of
Defense (DoD) standards.
6.5 System Update
System firmware update via the flash media.
6.6 Show Transfer Mode
Shows the latest transfer mode which the connected device can
support.
7. Setup
7.1 Copy Area
System and Files
Automatically analyzes the source data’s format
and copies only the data area.
Whole Media
