7
Function Table
Function
Description
1. Copy
Data and whole media duplication only.
2. Compare
Bit-for-bit comparison between the source and target flash medias.
3. Copy+Compare
First copies, then compares the target to the source once duplication
is completed.
4. Show CF Info.
This feature will show CF card’s brand, FW Version, S/N, capacity, file
format, and content size.
5. System Info.
This feature will show system information, such as, model number
and firmware version.
6. Utility
6.1 Do Format
6.1.1 Auto Format
Auto formats media to FAT16 or 32.
6.1.2 FAT16 Format
Formats media to FAT16.
6.1.3 FAT32 Format
Formats media to FAT32.
6.1.4 Set FAT 16 Cluster Size
Sets FAT16 Cluster size.
6.1.5 Set FAT 32 Cluster Size
Sets FAT 32 Cluster size.
6.2 Quick Erase
Erases flash media content, while keeping the FAT format.
6.3 Full Erase
Fully erases flash data bit-for-bit, including format and content.
6.4 DoD Erase
Erases flash three times, complying with USA Department of Defense
(DoD) standards.
6.5 System Update
System firmware update via the flash media.
7. Setup
7.1 Copy Area
System and Files
Automatically analyzes the source data’s format
and copies only the data area.
Whole Media
Copies the flash’s entire content, including the
empty space.
7.2 Button Sound
Enables or disables the audible beep.
