manualshive.com logo in svg

U-Reach HD-SU01, User Manual

The U-Reach HD-SU01 is a cutting-edge device designed for hassle-free data transfer. To ensure maximum convenience, we provide a comprehensive and user-friendly User Manual that can be downloaded for free from our website. Easily access valuable information and instructions to make the most out of your HD-SU01 experience.

Share
Download
background image

11 

 

Step3: Proceed to update firmware.

 

Connect this device to the source port. Scroll to select "5.2.1 Update BIOS”, then 
press "OK" to start the firmware update process.

 

Caution

 

The firmware update process may take longer than 5 minutes. Please do not 
disrupt power or process during BIOS update. If interrupted, the system will 
become useless. The manufacturer will not be held responsible for any 
damages.

 

 

5.3 System Info

 

This function will display basic information such as controller, model number, 
software version, etc.

 

Scroll to select "5.3 System Info”, then press "OK" to view all information.

 

 

5.4 Get Checksum

 

This function will will count CRC64 on each port. Scroll to select "5.4 Get 
Checksum”, then press "OK" to view all information.

 

Processing:

 

 
 
 
 

Result:

 

 
 
 
 

Caution

 

User is responsible for verification of targets’ quality. Testing a few completed 
targets in a mass production environment for quality control is recommended.

 

 

6. Setup

 

This menu contains submenus related to device information, system information 
and updates.

 

Scroll to select "6. Utility”, then press "OK" to view the submenus.

 

[Utility]

 

4. Get Checksum

 

[ #01 ]              76.6 G

 

7:54      33%    25.9 G

 

[ #01 ] Checksum :

 

D254A1F430094C8F

 

[ #02 ] Checksum :

 

D254A1F430094C8F

 

Summary of Contents for HD-SU01





















Reviews:

No comments

Related manuals for HD-SU01

Brands by name

Popular brands

Load more brands