21
The system will format per flash’s capacity. If capacity is above 2GB, the system will
format the flash to FAT32 and below 2GB, the system will format the flash to FAT16.
Capacity
<
2GB
Format FAT16
Capacity
>
2GB
Format FAT32
6.1.2 FAT16 Format
Sets the FAT16 format.
6.1.3 FAT32 Format
Sets the FAT32 format.
6.1.4 Set FAT16 Cluster Size
Sets the FAT16 cluster size.
6.1.5 Set FAT32 Cluster Size
Sets the FAT32 cluster size.
6.2 Measure Speed
This function measures the "read" and "write" flash media speed.
➊
Plug flash media into the slot, select function [3. Measure Speed], then press "OK" to
start this function.
➋
Use the
▲▼
keys to view the exact "Read" and "Write" flash media speed on each port.
Note
⚫
To protect source data, the
system will not execute “Measure Speed”
on the master device.
⚫
The function may alter the format and data content of flash.
6.3 Capacity Check
(Available in CF/CFast Series)
This function can quickly check the real capacity if it’s claimed.
➊
Plug in flash media, select function [6.3 Capacity Check], then press "OK".
CF Duplicator
2. Measure Speed
[#02] Read: 14.7MB
Write: 7.0MB
