17
6.4 Skip Bad Sectors
Scroll to select "Skip Bad Sectors”, then press "OK" to scroll through the available values for
skipping bad sectors. If the device data is critical and needs to be a full clone, it is
recommended to set “Skip Bad Sectors” at "0.” Bad sectors can be set as unlimited or at a
value from 0 to 65,535.
6.5 Erase Master
This function allows user to enable or disable the source port for sanitization.
Scroll to select "Erase Master”, then press "OK.” Then scroll through to select one of two
settings.
1. Disabled
Source port will be unable to erase.
Scroll to select "Erase Master >> Disabled”, then press "OK" to save this setting.
2. Enabled
Source port will be able to erase.
Scroll to select "Erase Master >> Enabled”, then press "OK" to save this setting.
6.6 Unknown Format
This function only works with “Copy Area >> System and Files.”
Scroll to select "Unknown”, then press "OK”. Then scroll through to select one of two settings.
Unknown format includes all forms of modified and proprietary data and partitions.
1. Copy Unknown
Copy unknown format(s).
Scroll to select "Unknown Format >> Copy Unknown”, then press "OK" to save this setting.
2. Skip Unknown
Skip unknown format(s).
Scroll to select "Unknown Format >> Skip Unknown”, then press "OK" to save this setting.
6.7 Erase Pattern
Scroll to select "Erase Pattern”, then press "OK”. Then scroll through to select one of two
settings.
1. One Byte
Random character written per byte.
Scroll to select "Erase Pattern >> One Byte”, then press "OK” to save this setting.
Caution
The “Copy+Compare” function is advised for enhanced copy accuracy.
