2
Function Table
8
Function
Description
1. Copy
To copy source HDD to multiple target HDDs. Refer to function 6.Setup for 3 different copy
mode selection.
2. Compare
To compare data bit for bit between source and copied HDDs.
3. Copy+Compare
It makes copy first and then compare copied HDD with source HDD to ensure data
correctness.
4. Erase
Note:
Function 6.4.3 can
s e l e c t t o e r a s e
source HDD or not.
4.1 Quick Erase
Erase HDD’s index table only, it takes short time to execute this function.
4.2 Full Erase
Erase the whole HDD content.
4.3 DoD Erase
Erase HDDs three times complying with USA Department of Defense (DoD) standard.
4.4 DoD EraseComp
Erase HDDs three times complying with n USA Department of Defense (DoD) standard and bit
by bit to check if data is completely erased.
4.5 Secure Erase
The international authorized high standard Secure Erase function. It is able to erase the area
which is not loadable.
5. Utility
5.1 Show Disk info
Shows HDD’s basic information such as HDD model name and capacity.
5.2 Update System
5.2.1 Update BIOS
To update the system firmware via the HDD.
5.2.2 Create Update HDD
To format the HDD with a 2GB FAT partition in order to quickly save
firmware in the HDD.
5.3 System Info
This function will show information of the duplicator system, including controller model, number
and software version.
Summary of Contents for Legend Series
Page 1: ...HDD Duplicator LE600 User Guide V2 1 Legend Series EN English...
Page 22: ......
Page 23: ......
Page 24: ......
