15
Does not copy HPA data and clears target device’s HPA setting.
Scroll to select "Clear Target HPA”, then press "OK" to save this setting.
❷ Setting Target HPA
Copies HPA setting from source device to target.
Scroll to select "HPA Copy Modes >> Setting Target HPA”, then press "OK" to save
this setting.
❸ Copy and Setting
Copies HPA setting and data from source device to target.
Scroll to select "HPA Copy Modes >> Copy and Setting”, then press "OK" to save
this setting.
6.4 Skip Bad Sectors
This function sets the number of errors you would like to skip during copy /
compare / erase process. The default is 0. You can choose 0-65535 or unlimited.
6.5 Erase Master
This function allows user to enable or disable the source port for sanitization.
Scroll to select " Erase Master”, then press "OK.” Then scroll through to select
one of two settings.
❶ Disabled
Devices connected to source port cannot be erased.
Scroll to select "Erase Master >> Disabled”, then press "OK" to save this setting.
❷ Enabled
Devices connected to source port can be erased.
Scroll to select "Erase Master >> Enabled”, then press "OK" to save this setting.
6.6 Unknown Format
This function only works with “Copy Area >> System and Files.”
Scroll to select "Unknown Format”, then press "OK”.
Unknown format includes all forms of modified and proprietary data and
partitions.
Caution
HPA function “Copy and Setting” may change the original parameter of target
devices. To reset it, user must set “Clear HPA at Erase >> Clear HPA Setting”
and then execute “4. Erase.”
