6
Function Table
Function
Description
1. Copy
Copy data from source HDD to targets. (There are four
copy modes for selection at function 6.1)
2. Compare
To compare data bit for bit between source and target
HDDs.
3. Copy+Compare
It makes copy first and then compare target HDD with
source HDD to ensure data correctness.
4. Erase
4.1 Quick Erase
To erase HDD’s index table only.
4.2 Full Erase
To erase whole HDD.
4.3 DoD Erase
To erase HDDs three times complying with USA
Department of Defense (DoD) standard.
4.4 DoD EraseComp
To erase HDDs three times complying with USA
Department of Defense (DoD) standard and bit by bit to
check if data is completely erased.
4.5 Secure Erase
The international authorized high standard Secure Erase
function.
5. Utility
5.1 Show Disk Info.
Shows HDD’s basic information such as HDD model name
and capacity.
5.2
Update
System
5.2.1 Update BIOS
To update the system firmware via a USB
pen drive or a HDD.
5.2.2 Create Update HDD
To format the HDD with a 2GB FAT
partition in order to quickly save
firmware in the HDD.
5.3 System Info.
Show information of the duplicator system, including
controller model number and software version.
