Copyrights © U.S. Converters
Mechanical dimensions
Note to Admin Panel’s UART Control advanced settings:
Character 1 and 2:
These are HEX numbers. Default value: 00FF. When sending data from serial to TCP the data is fist
stored in the cache, not until the value of character 1 or 2 is received from the serial side the data is released from the cache and sent to TCP.
Silent time:
If there is no data sent or received for the number of milliseconds specified the connection is dropped.
Drop character:
Drops the delimiter character of the serial port when sending to TCP, (the receiver doesn't display the character).
XS1000
94mm
25m
45mm
66mm
32,5mm
15mm
14mm
26mm
All mounting holes:
Ø3.5mm
5mm