SKU 02575
For technical questions, please call 1-800-444-3353.
Page 11
BOTTOM VIEW
LEFT sIDE RAIL (1L)
LEFT TAIL LIGHT (25L)
RIGHT TAIL LIGHT (25R)
RIGHT sIDE RAIL (1R)
RIGHT CONNECTING RAIL (8)
LEFT CONNECTING RAIL (7)
WIRING
HARNEss
UsE HEAVY GAUGE, NYLON,
TIE sTRIPs (NOT INCLUDED) TO
ATTACH WIRING HARNEss TO
UNDERsIDE OF FRAME.
FIGURE B
3.
Use heavy gauge, nylon,
tie strips
(not included) to attach the wiring harnesses of
the Left and Right Tail Lights (25L, 25R) to the
underside
of the Frame and Tongue
Assemblies.
(see Figure B.)
To Attach the Trailer Beds:
Align the
1.
four
mounting holes of a Trailer Bed (X) with the
two
mounting holes in
the Left Side Rail (1L) and
two
mounting holes in the Right Side Rail (1R). Secure
the Trailer Bed to the Left and Right Side Rails with
four
Bolts (A),
four
Washers
(C), and
four
Nuts (B).
Align the
2.
four
mounting holes of the remaining Trailer Bed (X) with the
two
mount-
ing holes in the Left Side Rail (1L) and
two
mounting holes in the Right Side Rail
(1R). Secure the Trailer Bed to the Left and Right Side Rails with
four
Bolts (A),
four
Washers (C), and
four
Nuts (B).
Insert
3.
three
Bolts (A) between the two
pre-assembled
Trailer Beds (X) and through
the
three
mounting holes in the Cross Member (2). Make sure the heads of the
Bolts overlap the edges of each of the Trailer Beds. Then firmly tighten the Bolts
with four Washers (C) and four Nuts (B).
The A-Tongue Trailer is now completely assembled and ready for use.
4.
REV 03d; 05f
