4
2
8
3
9
5
6
20
7
1
19
18
17
16
15
14
13
11
12
10
34
33
32
31
30
29
28
27
26
25
24
23
22
21
35
37
36
40
42
43
41
45
44
46
38
39
47
Page 10
B6000
16. Fast moving air will stir up dust and
debris which may be harmful.
Release air slowly when draining
moisture or depressurizing the com-
pressor system.
17. STOP the engine whenever leaving the
work area, before cleaning, making
repairs or inspections. When cleaning,
!
DANGER
This Compressor/pump is not equipped and should not be used “as is” to supply
breathing quality air. For any application of air for human consumption, the air
compressor/pump will need to be fitted with suitable in-line safety and alarm equip-
ment. This additional equipment is necessary to properly filter and purify the air to
meet minimal specifications for Grade D breathing as described in Compressed Gas
Association Commodity Specification G 7.1 - 1966, OSHA 29 CFR 1910. 134, and/or
Canadian Standards Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is used for the purpose of breathing air application and
proper in-line safety and alarm equipment is not simultaneously used, existing
warranties shall be voided, and The Manufacturer disclaims any liability whatsoever
for any loss, personal injury or damage.
!
WARNING
Do not spray flamma-
ble materials in vicini-
ty of open flame or
near ignition sources including the
compressor unit.
repairing or inspecting, make certain all
moving parts have stopped. Disconnect
the spark plug wire and keep the wire
away from the plug to prevent acciden-
tal starting.
18. Allow engine to cool before storing.
Spraying Precautions
19. Do not smoke when spraying paint,
insecticides, or other flammable sub-
stances.
20. Use a face mask/respirator when
spraying and spray in a well ventilat-
ed area to prevent health and fire
hazards.
21. Do not direct paint or other sprayed
material at the compressor. Locate
compressor as far away from the
spraying area as possible to mini-
mize overspray accumulation on the
compressor.
22. When spraying or cleaning with sol-
vents or toxic chemicals, follow the
instructions provided by the chemi-
cal manufacturer.
Breathable Air Warning
Page 3
