background image

Page 6

SKU 96524

For technical questions, please call 1-800-444-3353.

Turn the Handles (10) clockwise until the Chains are taut and the engine is held 

securely.    
Loosen engine mounts.  Turn the Handles (10) at 1/4” clockwise turns until the 

entire engine’s weight is supported by the chains.  Additionally loosen/disconnect 

the engine mounts.  
Never work on the engine while it is supported only by the engine Support.  

Moving the engine while it is suspended only by the engine Support can cause 

the engine Support to fail or shift, resulting in serious personal injury and/or 

property damage.

To prevent accidents, lower and reconnect the engine when finished working.  

The engine Support is not intended to be used as a long-term suspension 

device.  Clean, then store the tool indoors out of children’s reach.

MaintEnancE and sErVicing

damaged equipment can fail, causing serious personal injury.  do not use 

damaged equipment.  if abnormal noise or vibration occurs, have the problem 

corrected before further use.

cleaning, maintenance, and lubrication

bEForE Each usE,

 inspect the general condition of the tool.  Check for loose 

screws, misalignment or binding of moving parts, cracked or broken parts and 

any other condition that may affect its safe operation.

aFtEr usE,

 clean external surfaces of the tool with clean, moist cloth.

plEasE rEad thE FolloWing carEFullY

THe MANUFACTUrer AND/Or DISTrIBUTOr HAS PrOvIDeD THe PArTS LIST AND ASSeMBLy 

DIAgrAM IN THIS MANUAL AS A reFereNCe TOOL ONLy.  NeITHer THe MANUFACTUrer Or 

DISTrIBUTOr MAKeS ANy rePreSeNTATION Or WArrANTy OF ANy KIND TO THe BUyer THAT 

He Or SHe IS qUALIFIeD TO MAKe ANy rePAIrS TO THe PrODUCT, Or THAT He Or SHe IS 

qUALIFIeD TO rePLACe ANy PArTS OF THe PrODUCT.  IN FACT, THe MANUFACTUrer AND/Or 

DISTrIBUTOr exPreSSLy STATeS THAT ALL rePAIrS AND PArTS rePLACeMeNTS SHOULD Be 

UNDerTAKeN By CerTIFIeD AND LICeNSeD TeCHNICIANS, AND NOT By THe BUyer.  THe BUyer 

ASSUMeS ALL  rISK AND  LIABILITy ArISINg  OUT  OF  HIS  Or  Her  rePAIrS  TO  THe  OrIgINAL 

PrODUCT Or rePLACeMeNT PArTS THereTO, Or ArISINg OUT OF HIS Or Her INSTALLATION 

OF rePLACeMeNT PArTS THereTO.

6.

7.

8.

9.

1.

2.

Summary of Contents for 96524









Reviews: