SKU 91831 For technical questions please call 1-800-444-3353 PAGE 6
2.
Select the 3/8” square drive Impact socket (not included) you wish to use, and
insert the socket firmly onto the 3/8” Anvil (11) of the Impact Wrench.
(See Figure A.)
3.
Turn the Forward/Reverse Valve (30) to the desired direction in which the tool will
rotate. There is only
one speed for the Reverse (counterclockwise) direction,
and there are
three speeds for the Forward (clockwise) direction:
“F1” = Slow Speed / “F2” = Medium Speed / “F3” = High Speed.
(See Figure A.)
FIGURE A
4.
Connect the air supply hose to the Quick Connector on the Impact Wrench. Turn
on the air compressor, and set its regulator to the recommended 90 PSI for the
Impact Wrench. (See Figure B, next page.)
5.
In order to keep the air supply hose out of the way, hang it over your shoulder.
6.
IMPORTANT! Grip the Impact Wrench firmly with both hands.
7.
Insert the attached 3/8” square drive socket onto the bolt or nut you wish to
screw/unscrew, and with both hands firmly gripping the Impact Wrench apply
forward pressure to keep the socket from slipping off the bolt or nut.
F 3
REAR VIEW
REVERSE
F 1
F 2
QUICK CONNECTOR
(NOT INCLUDED)
3/8” ANVIL
(11)
SIDE VIEW
TRIGGER
(43)
AIR INLET
(47)
