FORM NO. 56041891 - 3
INSPECTION:
Carefully unpack and inspect your COBRA-300H for shipping damage. Each machine is tested and in-
spected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should
notify the carrier immediately if you notice damage to the box or to the machine or parts.
CLEANING SOLUTIONS:
We recommend liquid cleaning chemicals, such as our Magic Fabric Cleaner. Powder chemicals may be
used, but unless mixed very thoroughly they could cause a build-up in the pump, lines, heat exchanger
and/or quick disconnects. Any problem caused by a chemical build-up is not covered by warranty. Use
a neutral cleaner with a pH between 6 and 9 to avoid premature wear of the pump, seals, and/or other
components. Damage caused by the use of strong chemicals is not covered by the warranty
.
MAINTENANCE:
For optimum performance fl ush the machine with clear water at the end of each working day. Once a
month, minimum, run a fl ushing compound through the machine to break up any mineral or chemical
build-up that may have formed. U.S. Products’ “X-1500” is recommended. The vacuum motor, pump
motor, and the pump do not require any scheduled maintenance; however, the motors may require
replacement brushes after 1000 - 1500 hours, and the pump and bypass valve may require rebuild kits
after 1000 - 1500 hours, typically (refer to machine part list for numbers) Clean the body with an all
purpose detergent, and protect it with an automobile interior polish. Lubricate the wheels, castors, and
quick disconnects with an all purpose silicone spray
.
(and be sure to register your warranty; go to www.usproducts.com)
Serial Number: __________________
Model: COBRA-300H-JP
Purchase Date:_____________
Write the name and phone number of your distributor:
______
_______________________________
___________________________________________
https://harrissupplyind.com - To Order Parts Call 608-268-8080
