SWITCH PLATE
1. This green light will turn on when the two power cords are plugged into separate circuits. Try
different outlets with one cord until you can get a green light, otherwise a circuit breaker in
the wall may trip.
2. This selector switch determines whether you will use the 1200 psi pump or the heater. You
can select either, but not both at the same time. The heater will only work with the 500 psi
pump. The center position is OFF, and neither the 1200 psi pump nor the heater is turned
on. CAUTION: do not operate the 1200 psi pump and the 500 psi pump at the same time.
3. This light will turn on when the switch is set to the 1200 PSI pump.
4. This switch turns on the vacuum.
5. This switch turns on the 500 psi solution pump. CAUTION: do not run both solution pumps
at the same time.
6. This last switch turns on the automatic pump-out pump. Use this when you want the
machine to automatically pump out the recovered solution. CAUTION: do not turn on this
pump until you have connected the pump-out hose.
7. This light will turn on when you have selected heat instead of the 1200 psi pump.
HEAT
O
O
I
I
I
O
1200 P.S.I.
O
I
I
U.S. PRODUCTS
1
5
4
3
2
6
7
