background image

SAFETY INSTRUCTIONS

5

4.22 

SECURELY MOUNT ACCESSORIES TO THE MACHINE.

Extra care must be taken an elevated location to prevent injury to some-

one on a lower level in the event the tool or accessory should drop. Do 

not operate without fall protection for operator and debris protection for 

public.

4.23 

NEVER TOUCH THE MOVING PARTS.

Never touch moving parts such as shaft and drill extensions.

4.24 

STOP OPERATION IMMEDIATELY IF ANY ABNORMALITY IS 

DETECTED.

Stop using machine immediately if any abnormalities are observed during 

operation. Examples of abnormalities include unusual noise and vibration.

4.25 

WHEN REPLACING A PART, USE THE SAME TYPE 

AND QUALITY.

When replacing a component part with a new one, use only the same 

type and quality of new part. Never attempt to repair a machine if you are 

unfamiliar with proper procedures and techniques required.

4.26 

LOAD AND UNLOAD SAFELY. 

Use proper heavy lifting procedures. Read & understand manuals before 

loading & unloading.

4.27 

SAVE THESE INSTRUCTIONS.

Refer to this operations and maintenance manual as well as any addition-

al instructions included from other manufacturers and organizations.

4.28 

REFER TO METABO MANUAL

Refer to 36v Battery Operated Metabo 36LTX Grinder Owner’s Manual 

included with your Core EZ kit for operations,maintenance and safety 

gudelines.

DUST WARNING

Cutting, especially when DRY cutting, generates dust that comes 

from the material being cut, which frequently contains silica. 

Silica is a basic component of sand, quartz, brick clay, granite and 

numerous other minerals and rocks. Exposure to excessive amount of 

such dust can cause:

• Respiratory diseases (affecting your ability to breath), including 

chronic bronchitis, silicosis and pulmonary fibrosis from exposure 

to silica. These diseases may be fatal;

• Skin irritation and rash; and

• Cancer according to NTP* and IARC*

* National Toxicology Program, International Agency for Research 

on Cancer

Take precautionary steps

• Avoid inhalation of and skin contact with dust, mist and fumes;

• Wet cut when feasible, to minimize dust;

• Wear and ensure that all bystanders wear appropriate respiratory 

protection such as dust masks designed to filter out microscopic 

particles. (See OSHA 29 CFR Part 1910.1200) 

California Prop 65 Warning: Use of this product can cause exposure to 

materials known to the State of California to cause cancer and/or birth 

defects or other reproductive harm.

Waterworks

Division 

P: 866 987-7297  F: 813-621-7125  

Visit us at www.ussaws.com 

sales@ussaws.com

This tool creates an enormous amount of force.

Beware of crushing your fingers or other body parts.

 

 

 

 

 

 

 

TO PREVENT SERIOUS INJURY DO NOT OPERATE SAW WITHOUTPROPER TRAINING AND.  

UNDERSTANDING OF THE OWNERS MANUAL 

WHEN OPERATING THIS MACHINE 

 

 

ALWAYS WEAR SAFETY APPROVED 

 

 

 

HEARING PROTECTION 

EYE OR FACE PROTECTION 

PROTECTIVE HELMET

   

 

 

 

 

  

 

     

PROTECTIVE GLASSES OR FULL FACE PROTECTION 

 
 

      WEAR HAND PROTECTION 

WARNING: Improperly maintaining the JS  including the Honda  engine  or  failing  to  correct  a  problem  before 

operation could cause a malfunction resulting in a serious injury. Always perform a pre-operation inspection before 

each operation and correct any problem. See Honda Engines Owner's Manual. 

 

5.2

 

 

Check the condition of the Honda engine. See the section titled "Before operation - is your 

engine ready to go?" in the Honda Engines Owner's Manual. 

 

  

WARNING: Exhaust gas from gasoline engines contains dangerous carbon monoxide. Breathing it can cause 

unconsciousness and even kill you. Always operate gasoline engine machines in a well-ventilated area. Do not 

operate in areas where exhaust fumes could accumulate without wearing appropriate respiratory protection. 

Consult your employer and OSHA regarding use of appropriate respirator for dangerous carbon monoxide 

gases. See Figure 7. 

 

  

EEnnggiinnee  eexxhhaauusstt  ccoonnttaaiinnss  

ppooiissoonnoouuss  ccaarrbboonn  

m

moonnooxxiiddee  ggaass..  Breathing 

it could cause death.

 

Operate machine in well 

ventilated area.

 

 

 

 

FFiigguurree  77  --  W

Waarrnniinngg  llaabbeell  --  eennggiinnee  eexxhhaauusstt  ccoonnttaaiinnss  ccaarrbboonn  m

moonnooxxiiddee  ggaass  

1111  

Summary of Contents for CORE EZ















Reviews: