Your Dust Buggy requires the installation of the handle and
pointer before it is ready for use.
Recommended tools:
• Ratchet and Sockets
•
Wrench
• Allen Keys
•
Pliers
Install pointer as shown
Cycle the height
adjustment mechanism to
ensure that
everything is working
correctly.
Assembly
We recommend that the pointer be
adjusted so that it is next to the crack
to be cut, not in it.
This makes it easier to see if one is
cutting straight while keeping the
pointer from being affected by debris in
the crack.
Install handle as shown
The Dust Buggy handle comes
pre-assembled and simply
needs to be bolted to the rolling
chassis.
Begin with bolting the main
handle to the chassis. Make
sure to place the supplied
bent handle washer
opposite to the chassis as
shown.
Follow by removing the
bolt from the clamp
weldment and then thread
it through the handle
adjustment lever.
Insert the free loop of the
handle spring through the
hole in the chassis. We
recommend using a pair of
pliers to aid this process.
Dust Buggy