OPERATION CHECKLIST
Warning label - read and understand manual
5.1
This vacuum is designed for intermittent use, i.e. not more
than 2 hours continuously. If you are not sure about your application
requirements, contact your USSAWS representative.
WARNING:
U.S.SAWS vacuums are not to be used for the removal
of liquids or of volatile, viscous, flammable, or explosive media. If
you are unsure about your application requirements call your local
U.S.SAWS representative.
WARNING:
Carbon monoxide can cause brain damage or death.
Engine exhaust contains odorless and colorless carbon monoxide
gas. Signs of carbon monoxide poisoning include nausea, headache,
dizziness, drowsiness, and lack of consciousness. Get fresh air if
anyone shows signs of carbon monoxide poisoning.
TO PREVENT SERIOUS INJURY DO NOT OPERATE SAW WITHOUT PROPER
TRAINING AND. UNDERSTANDING OF THE OWNERS MANUAL
WHEN OPERATING THIS MACHINE
6
Wear Head Protec-
tion, breathing pro-
tection, and the use
of hearing protection
is mandatory
Flying debris
and loud noise
hazards. Wear
ear and eye
protection
Wear hand
protection
CAUTION:
Disconnect the machine from power before and during in-
spection and/or maintenance.
5.2
VACUUM LOSE SUCTION
Wear proper electrostatic
grounding equipment at all
times. Static discharge during
fueling can cause explosion
5.2.1
When the vacuum begins to lose suction, it means it is full or
the filter needs maintenance.
5.2.2
Stop use of your power tool.
5.2.3
Shut the motors off and wait for the motors to stop turning
completely to let the dust fall into the collection bin.
5.2.4
Shake the filter shaker back and forth to clean the filter
(Note: The shaker handle only needs to travel 2-3 inches and
does not need to be “slammed” to the stop point for effective
shakedown)
5.2.5
Use your foot to lift up on the dust bin positioning lever and
IMMEDIATELY turn one of the motors on. This will prevent air bore dust
from escaping the filter cavity. Inspect the level of dust in the bin and
empty it if it is more than 3/4 full. Slide dust bin all the way in until it
touches the front of the frame, and press the dust bin positioning
lever down firmly until the dust bin is locked in place.
Surface Prep
Division
P: 877-817- 6687 F: 813-621-7125
Visit us at www.ussaws.com
sales@ussaws.com
5.0
OPERATION CHECKLIST
Wear proper
electrostatic
grounding
equipment at
all times.
Static electricity spark hazard. Use static grounding devices.
WARNING:
Wear a two strap respirator when handling silica dust.
