U.S. Solid Ba+ery Spot Welder USS-BSW00007 Manual, Version 4.1, 2022.8.16
‘AL-NI’ Super Power Mode
The new-added ‘AL-NI’ super power mode is especially designed for the direct welding of
pure nickel to the aluminum terminals of LiFePo4, LiPo, etc. 0.2mm pure nickel is
supported with a max welding current of 3.3 KA, saving you the expensive cost of using
aluminum-nickel composite strips.
(Tips: Do not set the ‘AL-NI’ mode when welding ba+ery such as 18650, too large current
may cause large welding sparks and penetrate the ba+ery.)
Time-delay Welding Func+on
Appropriate delay ?me senng allows the welding pressure adjustment and ensure
a good welding effect.
Mode
Normal Mode
‘AL-NI’ Super Power Mode
Capacitor Voltage
5.6 V
6 V
Max Welding Current
2 KA
3.3 KA
Time-delay Welding
20ms
100-500ms
Dual Welding Pulses
N/A
Triggered when 500ms ?me-delay
10