U.S. Solid Ba+ery Spot Welder USS-BSW00007 Manual, Version 4.1, 2022.8.16
New Func+ons - Super Power ‘AL-NI’ Mode & Time-delay Welding
‘AL-NI’
Press the ‘LFP/NCR’ bu6on to turn on the ‘AL-NI’
super power mode, the capacitor voltage will be
charged up to 6V in this mode, 0.2mm pure nickel can
be directly welded to the aluminum terminals of
LiFePO4, LiPo, etc.
Time-delay
Press the ‘DISCH DELAY’ bu6on to switch the ?me-
delay senng
(set the ‘AL-NI’ super power mode and
‘AT’ welding mode firstly)
When ‘LO MI SS’ Signal is flashing, the pulse delay
?me is 100ms;
When ‘SS’ signal is normally on, the pulse delay ?me is 200ms;
When ‘MI’ signal is normally on, the pulse delay ?me is 300ms;
When ‘LO’ signal is normally on, the pulse ?me is 400ms;
Press the ‘DISCH DELAY’ bu6on for 2 seconds when ‘LO MI SS’ signal is
flashing. The ‘LO MI SS’ signal will be normally on and the pulse delay ?me
is 500ms, you can press the ‘DISCH DELAY’ bu6on again for 2 seconds to
cancel this senng.
8