U.S. Solid USS-FX, Manual

VII. Energy Converter Transducer

3. Piezoelectric Ceramics

1. High Tensile Screw

4. Amplitude

2. Electrode Plate
5. Connecting Screw

VIII. Installation

1.

Have the bracket and clamp assembled (the holding system for

 the

transducer).

2.

Have the transducer cable and transducer connected, then connect 

them

with

the main machine (ultrasound generator).

3.

Connect 

the 

power cable to 

the 

power supply and main machine.

4.

Put the transducer unit on the bracket or 

soundproof box

. Make

sure the

ultrasonic probe tip is inserted into the sample liquid surface and

in the

center of 

the 

container. 

The probe

should get into the liquid 5

mm to

10

mm

beneath the liquid surface.

 For large sample volumes, the distance

between the probe tip and the container’s bottom should be bigger than
30

mm. (The ultrasonic probe tip can be as close as 10

mm from the

bottom

of the container when processing a small sample

 size

 or when

using a

lower transducer power setting) If you hold the transducer unit to

process

the sample, hold it on SLEEVE position. Other positions are not

allowed.

It is prohibited to start ultrasonic output when the probe tip is 

out of the liquid

. O

therwise the energy converter and 

ultrasonic wave generator will be damaged.