www.totemmaker.net
Totem MiniLab
Expanding MiniLab
In this chapter several options on how to get even more from the MiniLab are discussed.
We hope that this will give you a jumpstart of your own ideas on where else you could use
your MiniLab. As MiniLab is a flexible and an always improving system, we would like to
hear your opinions! Please write what you feel is missing (or could be improved!) from the
MiniLab to info@totemmaker.net
Using breadboards
In the MiniLab kit you will find several breadboards, that together with easily accessible
MiniLab connections, arranged in a row can be accessed in a clean manner:
Fig. 34 Breadboard use in MiniLab
We suggest you to build the workbench from Totem construction parts where the
breadboards are mounted just bellow the LabBoard, so it helps not only with the
“containment” of the work area, but also gets rid of relative motion between breadboards
and external components in more advanced use cases. This helps to prevent accidental
wire disconnects which takes long time to find and creates a frustrating experience.
!
of
!
28
31
