background image

6 | 

P a g e

 

 

Non-software E5 lock: 

 

The user code can be any number up to 11 digits long providing it is

 not

 the same 

as the master code number that is assigned to the lock. Users are automatically assigned 
an ‘Index number’ in the order that they are added, beginning at 001 and incrementing by 
one at every new user. (That is, 001,002,003,004, etc.). You should keep track of what 
this index number is for each user, as this is 

required

 to later delete a user should you 

wish to do so.) 
 

Software version E5 lock: 

 

The user code can be any number up to 12 digits long as long as it is 

not

 the same 

as the master code number that is currently assigned to the lock. Users are automatically 
assigned an ‘Index number’ in the order that they are added, beginning at 001 and 
incrementing by one at every new user. (That is, 001,002,003,004, etc.). You should keep 
track of what this index number is for each user, as this is useful but not absolutely 
required to later delete a user should you wish to do so. (Software version locks have an 
additional feature not found in the non-software version locks -- it allows users to be 
deleted if you know what their user code key is 

or

 what their index number is.) 

 

 

Construction / Installer Code 

 
Non-software E5 lock: 

 

The Construction / Installer code is a manufacturer’s default code for use by a 

lock installer or during the construction phase of a building. The Construction / Installer 
code is 0 (zero), then the # sign. This allows the installer to easily test locking and 
unlocking the E5 lock or to allow easy access during construction. This code is 

automatically deleted

 when the first regular new user code is programmed into the E5 

lock. 

 
 
Software version E5

 

The Construction / Installer code is a manufacturer’s default code for use by a 

lock installer or during the construction phase of a building. The Construction / Installer 
code is 0 (zero), then the # sign. This allows the installer to easily test locking and 
unlocking the E5 lock or to allow easy access during construction. This code is 

automatically deleted

 when the first regular new user code is programmed into the E5 

lock. 

 

 

Service Keypad Code 

 
Non-software lock: 

 

A total of 10 one-time use keypad service codes are permitted and are typically 

used to allow maintenance or vendors a single access. When a service keypad code is 
used and the E5 is currently locked it will unlock. (If it is already unlocked, the E5 will 
relock.) Once programmed into the E5, these service keypad codes remain unless used or 

Summary of Contents for Eternity 4





















Reviews: