background image

4440 Creek Road • Cincinnati, Ohio 45242 USA

National Phone: 1-800-252-4647

Telephone: (513) 891-0400 • Fax: (513) 891-4882

www.uasinc.com

©2015 United Air Specialists, Inc.
Part No. 44-10345-0001
03/15

UNITED AIR SPECIALISTS, INC.

LIMITED WARRANTY

UAS  warrants  to  the  original  purchaser  that  all  equipment  will  be  free  from  defects  in  materials  and 
workmanship for one year from the date of shipment from UAS (three years for Smokeeter® and VisionAir™ 
models other than CC and DC series) and that major structural components on SFC and MCB series will be 
free from defects in materials and workmanship for ten years from the date of shipment from UAS.  This 
warranty applies only if equipment is properly installed, maintained, and operated under normal conditions 
and does not apply to damage caused by corrosion, abrasion, abnormal use or misuse, misapplication, or 
normal wear and tear.  This warranty will be void with respect to equipment that is subject to unauthorized 
repairs or modifications.  UAS makes no warranty as to goods manufactured or supplied by others.  This 
warranty  is  subject  to  any  limitations  in  UAS’  quotation  and  may  not  be  modified  except  by  a  written 
instrument signed by the President or Vice President of Sales of UAS.

THIS  WARRANTY  IS  EXCLUSIVE  AND  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  WHETHER 
WRITTEN, ORAL OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.

As  Purchaser’s  exclusive  remedy  for  any  defects  in  the  equipment,  UAS  will  exchange  or  repair  any 
defective parts during the warranty period, provided such parts are returned, prepaid, to UAS’ factory.  The 
obligation of UAS is limited to furnishing replacement parts F.O.B. UAS’ factory or making repairs at UAS’ 
factory of any parts that are determined, upon inspection by UAS, to be defective.  In no event will UAS be 
responsible for labor or transportation charges for the removal, reshipment or reinstallation of the parts.

IN  NO  EVENT  WILL  UAS  BE  RESPONSIBLE  FOR  ANY  SPECIAL  OR  CONSEQUENTIAL 
DAMAGES.

WARRANTY REGISTRATION: Register online at www.uasinc.com/registration.aspx

Summary of Contents for CLARCOR MCB 06-01-S

























Reviews: