Service Bulletin
12
UAV-1005757-001 Rev A
2. Hold down left and right button while applying power to the AV-30 and
AV-Link. Hold for 5 seconds. This will allow the AV-30 to enter the
bootloader mode. The screen will remain black. Do not interrupt power
during the update process.
3. Launch the previously downloaded AV Updater application.
4. On the AV Updater tool, select the appropriate COM Port from the
dropdown menu and click “Connect”.
5.
Proper connection has been made when the message “Unit Detected”
has appeared on the bottom left corner of the AV Updater Tool.
6. Once proper connection has been made, select the firmware file to
upload to the AV-30-
E by clicking “Open File” and selecting the
previously downloaded firmware file as identified in Table 5-1 Software
Update Files. A confirmation dialog will appear with the filename and a
calculated SHA1 hash. To confirm integrity of the file, compare the
Select COM#
Click Connect
Verify Connection
