Service Bulletin
19
UAV-1005757-001 Rev A
9 Post-Accomplishment Verification and Actions
On restart, verify that the startup screen displays the correct version
number. Access the Installation Menu to complete post-accomplishment
verification steps.
1. To enable access to the Installation Menu, ensure the unit is completely
turned off. Push and hold the main control knob in while power is
applied.
2. Keep the knob pushed until the startup screen displays, and then
release.
3. Ensure the unit is in AI or DG mode; select the mode by pushing and
holding the center button until the mode display changes.
4. In AI or DG mode, push the left button under the MENU until the
“INSTALL / ROT TO SEL” appears.