Service Bulletin
7
UAV-1005757-001 Rev A
4 Planning Information
4.1 Applicability
This Service Bulletin applies to uAvionix AV-30-E UAV-1004035-001 and
UAV-1004035-002 with operating software release 2.1.0 or earlier. For
magnetometer enhancement, the unit must be sent in to uAvionix for
hardware update. For improvement in DG function, the unit must be
connected to pitot and static. Use Table 4-1 Applicability to determine
applicability of the software update.
Hardware P/N Marking
Applicability
UAV-1004035-001
Verify by procedure
UAV-1004035-002
Verify by procedure
Table 4-1 Applicability
Parts identified above as “Verify by procedure” may have software release
2.1.0 or previous installed. To determine what version of software is
installed:
1. Push and hold center rotary knob while powering up unit.
2. Once the uAvionix startup screen displays you can release.
3. Push
left button under the MENU until the “INSTALL / ROT TO SEL”
appears.
4. Rotate knob until you
see “SW VERSION”
