AV-30-E Service Bulletin Software Upgrade 1.1.0
UAV-1005261-001 Rev A
connector preventing proper seating of the AV
seat the AV-Link completely before tightening the Jack Screws. Do not
attempt to use the Jack Screws to pull the AV
connector. AV-Link should seat firmly into the AV
on the right below.
E Service Bulletin Software Upgrade 1.1.0
1 Rev A
connector preventing proper seating of the AV-Link. Also, make sure to
Link completely before tightening the Jack Screws. Do not
attempt to use the Jack Screws to pull the AV-Link into the AV-
Link should seat firmly into the AV-30 as shown in the image
16
ink. Also, make sure to
Link completely before tightening the Jack Screws. Do not
-30
30 as shown in the image