UAV-1007487-001
Page
7 | 25
5 Introduction
FlightStation is a dual band (978MHz and 1090MHz), networkable ADS-B
receiver with a Power-Over-Ethernet (POE) interface enclosed in an IP67
rated protective enclosure. FlightStation provides ground surface or low-
altitude ADS-B surveillance within line of sight of the antenna, with range
dependent upon the output power of the transmitting ADS-B transceiver.
FlightStation is robust enough to be permanently mounted outdoors in
harsh environmental conditions, and small enough to be used as a mobile
asset for roaming operations. Installation is simple with included pole-
mount bracket, and a single POE cable which provides both power and
data communications. Configuration is accomplished via a simple web
interface. An integrated GPS provides location and precision timestamping
for messaging.
The FlightStation comes preconfigured for out of the box plug and play
behavior to automatically connect to the uAvionix FlightLine system.
Flightline provides a method to graphically view traffic as will and an API to
allow access to the data. The FlightStation is designed to the performance
specifications of DO-260B, DO-282B, DO-229C. Overlapping FlightStation
coverage will enable the uAvionix TruSky ADSB spoofing detection.
Summary of Contents for FlightStation
