_________________________________________________________________
UAV-1005573-001 Rev D
Page
40
of
46
6.5.1 Firmware Information
The skyStation firmware version, microLink radio version and the microLink
radio ID associated are displayed here. The user can update the skyStation
through the webpage by clicking the “update” link and the microLink Radio
through the SkyLinkApp. see section 0 and 0.
6.5.2 Configuration Items
Configuration Item
Description
Websocket URL
When using Skyline or a websocket to manage
missions, the mission data will be forwarded through to
the URL address entered in this field.
Data Mux IP Address
When this parameter is 0.0.0.0, the skyStation will act
as a TCP server and listen for incoming connections.
Alternatively, if this address is a valid IP address, the
skyStation will act as a TCP client and will attempt to
connect to a TCP server listening on [User TCP IP
Address : User TCP Port ]. 0.0.0.0 is the default setting
for this parameter.
Data Mux User Port
This is the port number used for the User connection.
Typically, the ground control software uses the User
connection to communicate with the aircraft. The
skyStation listens on this port and forwards any
received TCP datagrams from ethernet to the aircraft.
Any User connection data coming from the aircraft will
be sent as an ethernet TCP datagram to [User TCP IP
Address : User TCP Port].
Data Mux Control Port
This is the port number used for the Control
connection. The Control connection is used for device
configuration and device monitoring. The skyStation
will forward all internal data metrics through this port.
When you modify any configuration item,
press the Save button to store the changes. These fields are non-volatile
and persist through power cycles.
