_________________________________________________________________
UAV-1005573-001 Rev D
Page
45
of
46
6.5.5 microLink Update
The microLink Radio on the skyStation can be updated using the
SkyLinkApp. First connect the SkyLinkApp to the skyStation following the
steps in section 6.2.
In the upper right hand corner click the “Radio FW Update” button.
A new window will open. First click “Select File” and select the correct
firmware file to upload.
Then click
the “Connect” button. The Product Information window will
populate with radio information when a connection is made, and the
PingBoot Status in the bottom left will change to “Idle”
