UAV-1002185-001
19
Rev D
7 Installation
7.1 Unpacking and Inspecting
Carefully unpack the device and make a visual inspection of the unit for
evidence of any damage incurred during shipment. If the unit is damaged,
notify the shipping company to file a claim for the damage. To justify your
claim, save the original shipping container and all packing materials.
7.2 Wiring
tailBeacon is designed to use existing position light wiring. If new wiring is
required, refer to AC 43.13-1B Chapter 11 for guidance. The wiring should
present an impedance of less than 0.5ohm. The following table provides
guidance for typical aircraft hook-up wire.
Gauge
ohm/km
Maximum Length for 0.5ohm
20 AWG
35
14.2m
22 AWG
64
7.8m
Changes to the existing position light circuit breaker rating are not required.
7.3 Part Numbers
Item
P/N
tailBeacon
UAV-1002183-( )
tailBeacon TSO Installation Kits:
Item
P/N
Installation Kit for #4-40 screw mounting
UAV-1003202-001
Installation Kit for #6-32 screw mounting
UAV-1003202-002
Installation Kit for Ercoupe style mounting
UAV-1003202-003