Step 1
Select Side Rail, slide onto
Support Pin.
Step 2
Insert 3 x Screws into Lower
Rail, attach rail into Side Rail
(see
Fig. 03
) Turn screw clockwise
using Allen Key until tight.
Step 3
Repeat steps 1 & 2 with other
Side Rail.
Step 1
Lay Foot panel on the ground screw
holes facing up. Use screw driver to
insert 4 x Connecting Pins as per
diagram.
Step 2
Align Connecting Pins, slowly install
Foot Panel onto side rails checking
that all of the pins are connecting
properly.
Step 3
Insert Locking Cams with arrow
pointing towards the
Connecting Pins.
Step 4
Use Allen Key or Screwdriver to turn
Locking Cams clockwise, half a full
turn until tight (see
Fig. 04
x 4).
Summary of Contents for Nifty Junior Bed
