Pool Filter 400 / 500 / 600 - Pool Filter Sets 400-4m
3
/h / 400-6 m³/h / 500-9 m³/h / 600-13 m³/h
1
PRO
B
LEM
CAUSE
SOLUTION
Irregular operation
Water level in skimmer is too low.
Fill the swimming pool and filter.
The filter is empty.
Fill the filter.
The product’s throughput is low.
Due to prolonged use, the filter is dirty.
Activate the automatic cleaning mode.
The filter is empty.
Fill the filter.
Water is leaking out of the filter opening.
The surfaces between the valve and the filter are dirty.
Clean the multi-port valve, make proper connections and tighten
the hose clamps suitably.
The clamp is loose
The filter valve leaks at the end for the drain output
(WASTE).
Improper use of chemicals or use of unsuitable chemicals has
damaged the product’s inner seals.
Replace the top cover of the valve.
Avoid emptying chemical products in the preliminary filter basket
or the skimmer.
Due to improper use, the head valve is defective
(tightened too fast).
Replace the head valve and avoid excessive tightening.
The pump motor does not start
Not getting electricity
Check electrical lines.
Defective motor
Contact your dealer.
Water return is very weak (return inflow)
Check the filter pressure, the multi-port valve and the flexible line connection for signs of the problem’s cause.
The pressure gauge indicates the pressure is too high
The filter is clogged.
Rinse the filter.
Closed valve
Open the valve.
The pressure gauge indicates the pressure is too low.
The pump’s preliminary filter basket is clogged.
Clean it.
The skimmer basket is clogged.
Clean it.
The pump turbine is clogged.
Clean it.
The swimming pool water level is too low.
Add water to the swimming pool.
Closed valve
Open the valve.
Pump ran without water.
Fill the preliminary filter with water.
Air intake during suction
Check the tightness of the hydraulic connections.
Corre
c
t disposal of this produ
c
t
This symbol points out inside the EU that this product must not disposed via the domestic waste. Old devices contain valuable materials for recycling, which should
be passed on to recycling and not harm the environment or human health due to uncontrolled waste disposal. Please, dispose the old devices via suitable collecting
systems or send the device for disposal to the place you bought it from. This will then pass on the device to recycling.
Guarantee
We guarantee this product for two years against provable material and manufacturing faults, starting from the date of purchase. The original purchasing proof must be presented for
claims under this guarantee. The guarantee does not cover complaints caused by assembly and/or operating faults, insufficient care, frost damage, improper repair attempts, use of
force, third party faults, overload, mechanical damages or impact of foreign bodies. Also excluded from the guarantee are all complaints regarding damages to parts and/or problems,
which are due to wear. The warranty is void if the electrical cable and/or the plug are replaced, removed or damaged.
2
Conformity de
c
laration
The undersigned company UBBINK GARDEN BV declares in own responsibility that the swimming pool pumps Poolmax
51
TP 35 / TP 50 / TP 75 / TP 120 / TP 150 meet the
requirements oft
ff heEuropeanDirective2006/95EG
//
(Lowvoltage)and2004/108/EG(EMV).Thefollowingharmonisedstandardshavebeenapplied:EN60335-1:2002+A1+A11+A12+A2+A13;EN
60335-241:2003+A1; EN 50366:2003+A1; ZEK 01.1-08/06.08 EN 55014-1:2006; EN 55014-2:1997+A1; EN 61000-3-2:2006; EN 61000-3-3:1995+A1+A2
8
Summary of Contents for Pool Filter 400
Page 1: ...P Poo ool lFilter Pool Filter 400 500 600 Pool Filter Set 400 500 600...
Page 2: ......
Page 40: ......
